The original since 2002
100% natural stone surface
Over 70 decors available
Free sample shipping (US)

What is Slate-Lite?

We have developed a revolutionary process in which many paper-thin layers of stone can be obtained from solid blocks of stone.

The stone layers are not chipped off as with conventional stone slabs, but are removed using a resin.
Each of these slabs is unique and is produced by hand in over 12 processing steps.
The look and feel of the solid stone slab is retained.

Slate-Lite stone veneers are available in many different sizes, depending on the laying pattern and spatial effect you would like to achieve.

Our standard sizes are:
S // 30 x 60 cm /  23.62 x 11.81 in (approx. 0.18 m² / 1,93 ft2) *)
M // 122 x 61 cm / 48 x 24 in (approx. 0.74 m² / 7,96 ft2)
L // 240 x 120 cm / 94.48 x 47.24 in (approx. 2.88 m² / 31 ft2)
XL // 280 x 120 cm / 110.23 x 47.24 in (approx. 3.36 m² / 36,16 ft2)

Due to the ease of processing, our stone veneers can of course also be cut to any desired special size with millimeter precision.
If you do not want to cut and customize the material yourself, you can also have your desired decor produced directly in our store to the millimetre or order a cut of the material via our workbox services.

If you require even larger formats, please simply contact us - many decors can be produced up to a length of 350 cm / 137,80 in !


*) The 30 x 60 cm / 23.62 x 11.81 in format is currently available in the Stick&GO! version with self-adhesive film in selected decors.

The slate decors from Slate-Lite impress with a rather smoother surface with different and constantly changing patterns and structures.

The limestone decors from Slate-Lite impress with a rather smoother surface with relatively homogeneous patterns and structures.

The myca decors from Slate-Lite have a somewhat rougher surface with predominantly homogeneous patterns and structures. One particularly eye-catching effect is the slight sheen of the material, which is created by the natural quartzite content in the stone.

The marble decors from Slate-Lite impress with their rough-split surface with different and constantly changing patterns and structures. Strong veins and elevations in the surface are a typical feature of cleft marble.
Note: The marble decors can sometimes be a few millimeters thicker than other decors.

The sandstone decors from Slate-Lite stand out due to their slightly rough, rather grainy surface with slight differences in height.

The ArtDecors Lite from Slate-Lite combine the advantages of our real stone veneers such as weight, processing and flexibility with extraordinary surfaces in a metal look.

Slate-Lite is the all-rounder among stone veneers:
This thin real stone veneer with a 100% natural stone surface is extremely robust thanks to its fiberglass backing and is suitable for both indoor and outdoor use. Slate-Lite is extremely light and has a total thickness of only approx. 1.5 mm /   0.06 in .

Use the stone veneers both indoors and outdoors for wall cladding, as a backsplash in your kitchen or as a veneer for your furniture. Even unusual living environments made of stone in wet areas such as bathrooms or showers are possible with Slate-Lite!

UltraThin eco+ is our 3D moldable stone veneer:
The 3D flexibility is achieved by using a cotton mat as a substrate. Nevertheless, UltraThin eco+ also has a 100% natural stone surface!

UltraThin eco+ is particularly environmentally friendly thanks to its CO2-saving transportation due to its light weight and low consumption of natural stone resources.

The natural mat on the back of UltraThin eco+ allows easy processing and opens up many new possibilities in interior design and furniture construction.
With UltraThin eco+ you can even master complex special shapes and difficult edge areas without any problems!

Another unique feature of UltraThin eco+ is its processing:
Despite the natural stone surface, you can even cut UltraThin eco+ to size with scissors or a cutter knife!

Translucent is our translucent stone veneer:
Like all stone veneers from Slate-Lite, our Translucent product range has a 100% natural stone surface with a low weight and an overall thickness of just approx. 1.5 mm / 0.06 in.

The special thing about Translucent:
The transparent backing material on the reverse of the stone sheet. This translucent backing creates unique lighting effects with a light source behind the stone sheet, so that extraordinary backlit objects can be created!
Depending on the type of light, different effects can be achieved: you can use cold, warm or even colored light to create your individual light object made of stone.

Let the world shine in a new light and discover how easily you can bring incredible eye-catchers into your home with backlit stone!

Our Artdecors Lite product range comprises stone veneers that have been coated with a final high-quality finish using metal paints.

All material properties such as the low overall weight or the easy processing of the material are retained.
Artdecor Lite is suitable for a wide range of interior applications such as modern wall design and unusual furniture construction.

Slate-Lite Stoneboards are a more stable and slightly thicker version of our translucent translucent decors.
Due to the thicker overall thickness of approx. 3-4 mm / 0.12-0.16 in , you can generally dispense with additional bonding to acrylic glass.

Due to their size and properties, Stoneboards are ideal as back walls, counters and other light objects.

Our thin stone veneers generally have the following thicknesses:

Slate-Lite: approx. 1 - 3 mm / 0.04 - 0.12 in
UltraThin eco+: approx. 0.5 - 0.9 mm / 0.02 - 0.04 in
Translucent: approx. 1 - 3 mm / 0.04 - 0.12 in

Please note that slight variations in thickness are sometimes possible due to the natural stone surface.

Our real stone veneers can be bent gently due to their low thickness.

The bendable radius varies depending on the series selected:
Slate-Lite can be bent approx. 5 cm / 1.96 in and Translucent 10 cm / 3.93 in.
UltraThin eco+ can be bent to some extent in 3D due to its cotton backing.

Slate-Lite North America is located in Orlando, FL 32805.

Our thin stone veneers are produced in India.
Naturally, we take great care to ensure good working conditions and compliance with safety regulations in our production facilities. The health of our employees is particularly important to us:
All employees in our factories must wear appropriate protective clothing - depending on the work process, this includes face masks, ear protection, safety goggles, gloves and safety shoes.

The processing of natural stone normally results in a high level of fine dust pollution.
However, thanks to Slate-Lite's innovative production method, this can be drastically reduced: As the solid blocks of slate are not chiseled or split during the production of Slate-Lite, but are stripped in layers, there is no fine dust pollution for our employees during this work step.

The process steps of sawing and grinding the slate blocks are carried out in our factories in conjunction with water and any dust that occurs is therefore directly bound. The risk of health hazards from silicosis, also known as stone dust lung, is therefore eliminated during the Slate-Lite production process!

Thanks to their lightness and thinness, our paper-thin stone veneers are not only easy to work with and offer unique possibilities for indoor and outdoor use, with Slate-Lite you are also opting for environmentally friendly stone decoration!
The emission rates during transportation are many times lower with Slate-Lite than with conventional stone slabs, which results in a significantly more positive ecological balance.

The majority of our goods are shipped by sea to our central warehouse. With pollutant emissions of approx. 15.1 grams of CO2 per kilometer (source: NABU), this results in the following example calculation for one of our containers:
(comparative calculation: sea route India/Germany. Granite slab vs. Slate lite)

  Transport route Material quantity (m²) Load (kg)
Slate-Lite Sea container 40' 10.637 m² 26.500 kg
Granite slab (2 cm) Sea container 40' 441 m² 26.500 kg
  Distance (km) CO2-emissions (g) CO2-emissions / m²
Slate-Lite 7.500 km 3.001.125,00 282,12 g
Granite slab (2 cm) 7.500 km 3.001.125,00 6.806,27 g


A sheet of Slate-Lite therefore produces approx. 95% less CO2 than a conventional thick stone slab during transportation!

In addition, the manufacturing process we have developed also conserves natural resources in the quarries: From the stone material of a single conventional stone slab of 2 cm / 0.78 in, we obtain 200 - 300 slabs of Slate-Lite, depending on the decor!

Of course, we are also focusing more and more on recyclable solutions for our packaging, which has enabled us to reduce the amount of plastic waste many times over in recent years. And of course we will continue to work on this in the future!

Slate-Lite is harmless to health!
Slate-Lite meets the highest quality requirements, also in terms of health.

Best example: Our recent VOC emission test was passed with flying colors (result class A+).
High VOC values are a health concern: unpleasant odors, irritation and symptoms in humans that cannot be directly attributed to an illness are possible consequences for personal health.

We tested the slate veneer "Falling Leaves" as an example - due to the extremely low emissions measured, the test institute was even able to terminate the test chamber test prematurely.

Slate-Lite can be cleaned with all commercially available, non-corrosive household cleaners.
In most cases, clear water and a lint-free cloth or brush will suffice.

In outdoor areas, cleaning with a high-pressure cleaner is also possible, but please observe the distance recommended by the appliance manufacturer when using it.

Our prices depend on the respective stone type and size of the decor.
You can find all prices conveniently and clearly arranged directly under your desired decor in our online store.

Slate-Lite is heat-resistant up to 120°C / 248° F and has achieved EU class Cfl-s1 (according to EN 13501-01 for floor coverings) or B1 (according to DIN 4102). Slate-Lite is also available in a special composition as EU class Cs3d0.

If you have any further questions, please contact our sales department.

Slate-Lite is heat-resistant up to 120°C / 248°F and has achieved EU class Cfl-s1 (according to EN 13501-01 for floor coverings) or B1 (according to DIN 4102). Slate-Lite is also available in a special composition as EU class Cs3d0.

If you have any further questions, please contact our sales department.

Our current abrasion test in accordance with DIN EN ISO 10545-7 was carried out with the myca "Silver Grey", achieving class 1.

Class characteristics: Suitable for light use, barefoot or with slippers.

Slate-Lite has achieved the slip classes R9 (colored slate) and R10 (myca slate).

The prices of the stone veneers depend on the type of stone and the selected veneer size.
The prices shown in the store refer to one sheet of stone veneer.
The respective price per square meter is shown below as a comparative size.

Weathering causes hardly any or minimal uniform deviations in coloration.

Test method:
Resistance to UV radiation (UV-B) according to DIN EN ISO 11507
Test cycle: 4 hours; irradiation 50°C / 4 hours; thawing 40°C
Test duration: 1,000 hours with evaluation after 250h, 500h, 750h
Evaluation: Color change according to DIN EN ISO 11664-4, Sp62 by X-Rite Measuring geometry: d/8°, illuminant: D65

The answer is clear: Yes!
Our bestselling decors are also available directly as stone veneers with a stacking stone look. Here, thin stone veneer strips are glued to a fiberglass mesh from over 70 individual parts, so that you can create the look of a brick wall behind your fireplace in no time at all.

Thanks to the 100% natural stone surface, the weathering of our stone veneers causes hardly any or minimal uniform deviations in color.

Signs of weathering such as black mold, algae, green deposits or other environmental soiling can usually be removed quickly and easily with clear water and a brush.
In outdoor areas, cleaning with a high-pressure cleaner is also possible, but please observe the distance recommended by the appliance manufacturer when using it.

Application areas

You can use Slate-Lite in wet areas such as showers and bathrooms without any problems.

Please only note that a protective sealant is recommended for the material to ensure durability and easy cleaning. As with any other wall covering, the substrate of the surface to be finished must also be sealed in accordance with applicable DIN standards.

In principle, all decors are suitable for showers and bathrooms; only the two limestone decors ICE PEARL and GREEN PEARL are excluded from use in wet areas.
UltraThin eco+ and ArtDecors Lite are unfortunately not suitable for use in wet areas.

You can use Slate-Lite outdoors without any problems. (with the exception of the ICE PEARL and GREEN PEARL decors)

In most cases, additional protective impregnation or sealing is not necessary outdoors.
Depending on the application location, you can apply an impregnation if required, e.g. our Slate-Lite Special Impregnator or Slate-Lite Protection.
Our sales department will be happy to advise you further.

As with any other wall covering, the substrate of the surface to be treated must also be waterproofed in accordance with applicable DIN standards.

Slate-Lite and Translucent are frost and weather resistant.

Slate-Lite can also be used as a material for modern and high-quality house facades.
For further information on the use as a facade, please refer to the corresponding topic page in our store or contact our sales department directly.

Yes, Slate-Lite can be used as a facade.

FAQ are currently being revised. You can find more information on this on our FACADE topic page or contact our sales department directly at sales@slate-lite.com (for US: usa@slate-lite.com)

You are welcome to use Slate-Lite in the kitchen. When used as a backsplash, we recommend sealing the stone veneers to protect the surface from heavy soiling and to make it easier to clean.
We recommend our Slate-Lite Extreme Protection.
Please apply 2 coats of this in the kitchen to ensure optimum protection.

Use as a worktop is possible, but is only recommended under certain conditions due to the rough surface of the stones and the extreme loads caused by cutting tools, hot pots/pans etc. If you use Slate-Lite as a work surface, you should always impregnate the material several times with our Slate-Lite Special Protection.
Please note, however, that the pearl protection is a food-safe impregnation and not a sealant. The material does not become cut-resistant through the application of our pearl protection.
We therefore recommend using cutting tools only in conjunction with a cutting board, as otherwise scratches would remain on the surface of the material. Please also always use an appropriate trivet for hot pots/pans.

To make cleaning the material easier, we recommend using flat, smooth decors in this area.
You can also bond Slate-Lite directly over existing tiles if required. Please just make sure that the substrate is clean and that the bonding surface is not damaged.

Use as a worktop is possible, but is only recommended under certain conditions due to the rough surface of the stones and the extreme loads caused by cutting tools, hot pots/pans, etc.
If you use Slate-Lite as a work surface, you should always impregnate the material several times with our Slate-Lite Special Protection.

Please note, however, that the pearl protection is a food-safe impregnation and not a sealant. The application of our bead protector does not make the material resistant to cutting.
We therefore recommend using cutting tools only in conjunction with a cutting board, as otherwise scratches would remain on the surface of the material. Please also always use an appropriate trivet for hot pots/pans.

To make cleaning the material easier, we recommend using flat, smooth decors in this area.

Yes, Slate-Lite can also be used in the fireplace area.

Slate-Lite is heat-resistant up to 120°C / 248°F and has achieved EU class Cfl-s1 (according to EN 13501-01 for floor coverings) or B1 (according to DIN 4102).
On request, our stone veneers are also available in a special composition as EU class Cs3d0.

Our standard adhesives for Slate-Lite are temperature-resistant up to 90°C / 194°F, which is sufficient for most applications around the fireplace.
For special applications with higher temperature requirements, please contact our sales department.

Yes, Slate-Lite can also be used in the sauna.

Our stone veneers are waterproof and heat-resistant up to 120°C / 248°F.
Our standard adhesive is temperature-resistant up to 90°C / 194°F.

You can also use Slate-Lite for furniture construction.

Depending on the application, the panel must be provided with a stress equalizer.
We generally recommend UltraThin eco+ product range for this due to its low overall thickness.

You can use Slate-Lite outdoors without any problems.

Vertical installation as a wall is the simplest and most common method.

Floor projects are always carried out at the discretion of the installer, whether indoors or outdoors. Many successful flooring projects have been completed with Slate-Lite in the past, but we cannot guarantee its use as a floor covering.
When bonding over old tiles, you should fill existing joints beforehand, as otherwise the old joint pattern could show through over time.
As with any other wall covering, the substrate of the surface to be processed must of course also be sealed in accordance with applicable DIN standards.

The UltraThin eco+ product range is expressly excluded from use as a floor covering and also for outdoor use!

You can also use Slate-Lite in the pool area or directly in the pool, both in salt water pools and in chemical pools with chlorinated water.
A complete list of all decors recommended for use in pools can be obtained from our sales department at sales@slate-lite.com (for US: usa@slate-lite.com).

Please note that we do not recommend any protective sealing or impregnation for standing water, as this could lead to color changes.
As with all pool materials, the substrate must also be waterproofed in accordance with DIN standards.
With standing water, it is possible (as with conventional tiles) for white lines and residues to appear at the edge of the water. These can usually be easily removed with a high-pressure cleaner.

In the past, many successful flooring projects, including stairs, have been completed with Slate-Lite, but we cannot guarantee its use as a floor covering. Flooring projects are therefore always at the discretion of the installer.

If you wish to use Slate-Lite as a floor covering, we recommend sealing the stone veneers with Slate-Lite Extreme Protection.

When bonding over old tiles, you should fill existing joints beforehand, as otherwise the old joint pattern could show through over time.

The UltraThin eco+ product range is expressly excluded from use as flooring!

Slate-Lite can be used in freshwater aquariums.

Clean both sides of the Slate-Lite sheet with our Special Cleaner before use to ensure that residual carrier material does not pose a health risk to your fish.

We do not stock any protective products for the real stone decor in the aquarium sector.

You can obtain a list of all usable Slate-Lite decors from our sales department at sales@slate-lite.com (for US: usa@slate-lite.com) or read our further information under the question "Can Slate-Lite be used in the pool area?"

Many successful flooring projects have been completed with Slate-Lite in the past, but we cannot guarantee its use as a floor covering. Floor projects are therefore always carried out at the discretion of the installer.

If you wish to use Slate-Lite as a floor covering, we recommend sealing the stone veneers with our Slate-Lite Extreme Protection.
When bonding over old tiles, you should fill existing joints beforehand, as otherwise the old joint pattern could show through over time.

Our UltraThin eco+ product range is expressly excluded from use as flooring!

Processing

The data sheets and safety data sheets can be found in the description of each product. There you can download the data sheets and safety data sheets directly as pdf files if required.

The data sheets and processing instructions for the Slate-Lite, UltraThin eco+ and Translucent product ranges are also available for download in the PROCESSING section.

The basic processing of Slate-Lite is carried out in four simple steps:
1) Cut Slate-Lite to size (if necessary)
2) Impregnate or seal depending on the installation location
3) Apply a suitable adhesive to the entire surface of the wall or the back of the stone sheet
4) Position Slate-Lite in the desired location and press into place

Detailed application instructions can be found in our store in the Processing section and in our data sheets.

We also offer regular workshops where you can learn how to use our stone veneers.

Sure, definitely!

Slate-Lite stone veneers can also be laid quickly and easily over old tiles.
This completely eliminates the tedious, dirty and laborious removal of old and unloved tiles and brings you closer to your dream bathroom faster than ever before!

Bonding to old tiles is extremely simple: once the substrate has been properly sealed in accordance with applicable DIN standards, the old tiles simply need to be cleaned to remove dust and grease.
Then apply the Slate-Lite adhesive with a B3 notched trowel and press the stone sheet into place - done!

Note: for horizontal surfaces, old joints must be filled beforehand, otherwise the joint pattern may push through.

(Please note that the amount of adhesive required can be up to 40% higher than usual, as the existing joints must be filled)

In our YouTube video, you can see an example installation showing how easy it is to make old tiles disappear with Slate-Liteclick here

Cutting our thin stone veneers to size is extremely easy, and almost any standard DIY tool is suitable for this:
You can cut Slate-Lite to the required size with millimeter precision using a hand or table saw, jigsaw or multitool.

Simply cut the stone sheet from the back using a wooden or plastic saw blade with medium teeth.
If necessary, then lightly sand the cut edge with sandpaper.

Our UltraThin eco+ product range can even be cut with scissors or a cutter thanks to its cotton underside.

All our stone types (except ICE PEARL and GREEN PEARL) are suitable for use in wet areas such as bathrooms and showers!

Flooring projects are always carried out at the discretion of the installer.

Many successful flooring projects have been completed with Slate-Lite in the past, but we cannot guarantee its use as flooring.
If you wish to use Slate-Lite as a floor covering, we recommend sealing the stone veneers with our Slate-Lite Extreme Protection. When bonding over old tiles, you should fill existing joints beforehand, as otherwise the old joint pattern could push through over time.

Our UltraThin eco+ product range is expressly excluded from use as a floor covering!
Please contact our sales department for a list of possible decors.

Our protective products are not compatible with each other, so please refrain from combining different impregnations or sealants.

Slate-Lite is intended for permanent installation.

However, if you want to use our real stone decors in a rented apartment and a permanent installation is not possible after consultation with the lessor, we have an installation tip for you here, which can be dismantled if you move out:
Screw a base plate (e.g. wood) to the wall and simply glue the stone veneers to it.

Our thin stone veneers are suitable for almost all substrates!
You can easily bond our stone veneers to these substrates, among others: Concrete, plasterboard, wood, metal, tiles, plaster, glass etc.

No special preparation is required for "stable" substrates: The substrate simply needs to be smooth, dust-free, clean and dry. Crumbling substrates such as old, flaking plaster or wallpaper that is already peeling off must be primed in advance to ensure a permanent bond between the adhesive and the wall.
Excessive unevenness in the substrate must either be treated with a primer or sanded down.

The translucent Translucent stone veneers are processed with our special transparent adhesive Translucent Crystal Clear.
The adhesive is simply applied to the mounting surface or the back of the stone sheet using a smooth spatula.

In principle, any light source behind the stone sheet is possible.

The simplest method for uniform illumination is an LED panel with high light output. However, you can also use fluorescent tubes, light bulbs or LED strips. In this case, a frosted glass pane between the light source and the Translucent decor helps to distribute the light better. A sufficient distance between the light source and Translucent (approx. 6 cm) also ensures optimum light diffusion.

Depending on whether you use warm, cold or colorful RGB light, you can create different lighting moods.

No, we do not sell a complete ETICS package. You can buy the natural stone veneers from us, which you can bond to the mineral substrate reinforced with reinforcing mesh as the final top layer.

The basic structure of the ETICS façade is carried out in accordance with current regulations and standards.
The reinforcing mesh must be located in the upper third of the render layer (executed in accordance with VOB/C[1]ATV-DIN 18350, DIN EN 13914 and DIN 18550), whereby the thickness of the render layer must not be less than 5 mm.
Unevenness must not exceed ± 3 mm so that the adhesive application using a B3 notched trowel provides sufficient adhesion.

Slate-Lite can be simply bonded to the mineral substrate reinforced with reinforcing mesh as a final top layer on a standard ETICS façade.
The basic structure of the ETICS façade is carried out in accordance with current regulations and standards.

The reinforcing mesh must be located in the upper third of the render layer (executed in accordance with VOB/C[1]ATV-DIN 18350, DIN EN 13914 and DIN 18550), whereby the thickness of the render layer must not be less than 5 mm.
Unevenness must not exceed ± 3 mm so that the adhesive application with a B3 notched trowel provides sufficient adhesion.

For optimum bonding, we recommend our Slate-Lite Extreme Adhesive.
The following video shows an example of basic bonding with our Extreme Adhesive:

Almost all Slate-Lite decors are suitable for outdoor use and as a stone façade.
Exceptions to this are our ICE PEARL and GREEN PEARL limestone decors, which are not approved for outdoor and wet areas.

Our sales department will be happy to send you a list of all the decors that you can use for your natural stone façade. Just get in touch with us!

The Slate-Lite cladding is not open to vapor diffusion due to the GRP support of the stone material.
This means that no moisture can penetrate.

Thanks to the 100% natural stone surface, you generally do not need to protect Slate-Lite stone veneers for outdoor use with an impregnation or sealant.

If you require additional protection against snow, salt or rain in addition to the natural properties of the stone surface, we recommend the use of our Slate-Lite Special Protection for outdoor use.

Our standard adhesives for Slate-Lite are temperature resistant up to 90°C (194°F), which is sufficient for most applications around the fireplace.
For special applications with higher temperature requirements, please contact our sales department.

Bonding the Slate-Lite stone veneers is extremely simple:
Simply apply the adhesive to the back of the stone sheet or directly to the mounting surface, press the stone veneers into place - DONE!

In the following video, we show you how to apply our recommended Slate-Lite Extreme Adhesive. This ready-to-use MS adhesive is simply spread with a B3 notched trowel. Make sure that the adhesive is evenly grooved and do not smooth it out.
Then press the Slate-Lite stone veneer onto the desired area with light and even pressure or a pressure roller and that's it!

To achieve an optimum result, work with a spirit level.
Adhesive residue on the sheet can be removed with our special cleaners.

The stone surface of Slate-Lite can be drilled through with any standard (stone) drill.
Nailing and screwing is also possible without any problems.

Of course, you can also press Slate-Lite onto a variety of different substrates if required. These can include MDF, chipboard, plywood, multiplex, HDF or AluDibond.

We recommend the use of a backing paper of approx. 120 g/m² or another laminate (HPL) to avoid cupping due to the surface tension of the stone layer.

Slate-Lite can be laid butt-to-butt without a joint or with a joint - just the way you like it best!

Work as you would with any normal tile and bond the stone veneers with a tile cross in the desired joint width. Then fill the joint with a natural stone grout. Do not leave masking tape, which you have stuck to the edges to prevent grout from spilling over, on the stone surface for too long and follow the manufacturer's instructions for using the grout and the notes in our data sheet.
In the shower, we recommend laying with a joint instead of butt-to-butt to ensure easier cleaning.

Depending on the installation location, you can use Slate-Lite without additional surface protection, for example in indoor are
as with low levels of stress.
For applications in areas with high loads, such as the kitchen or in the shower and bathroom, we recommend using an additional impregnation or sealant.
This is usually applied to the stone surface with a foam roller in a criss-cross pattern; this can be done before or after installation.

For detailed instructions on the protective products, please refer to the respective data sheets and recommendations in our theme worlds. In the following video we show you an example of the simple application of our strongest sealer Slate-Lite Extreme Protection.

Shipping, delivery & returns

We ship Slate-Lite worldwide!

The only exceptions are certain danger zones and war zones.
If you want to ship to a crisis area, please contact our sales department beforehand.

Our standard format of 122 x 61 cm / 48 x 24 in is sent to you stacked in a flat shipping box.
Depending on the chosen decor, up to 15 sheets fit into one package.

Large formats with 240 x 120 cm / 94.48 x 47.24 in and 280 x 120 cm / 110.23 x 47.24 in are sent on a pallet or rolled.
To do this, we heat the sheet over its entire surface and carefully roll it up. Up to 2 large formats fit into one box.

Please note:

Warm up the rolled large format before unrolling, let it lie flat and lay itself out at the end. Proceed with caution - unrolling too quickly can damage the stone sheet.

Please note that small stone chips do not represent any damage to the material, but are rather a sign of the quality of the genuine natural stone surface:
Despite small stone chips in the package, the Slate-Lite sheet is usually completely undamaged and the stone surface is intact over its entire surface! In addition, slight superficial scratches may occur on the material, which unfortunately cannot be avoided due to storage and transportation. Such light scratches can be easily wiped away with a lint-free cloth and do not constitute damage to the material!

All common transport routes are suitable: sea and air freight as well as courier shipments. As Slate-Lite is very light, it can be shipped worldwide without any problems. For urgent shipments, it is even advisable to send it by courier.

Returns from Slate-Lite are generally possible.

Exception: Remaining stock, special formats and coated goods are excluded from exchange! (see also AGB point 12)

Please note point 12 of our GTC regarding possible returns:
Excerpt AGB 12.

Return or withdrawal from the order When returning ordered goods without material defects, 15% of the sales value or at least €30 will be charged for processing fees. The processing fees amount to a maximum of 150€. The shipping costs for the delivery will not be credited.
This regulation applies to business customers.
The goods must be undamaged, i.e. in the same condition as when they left the warehouse. This will be checked during the incoming goods inspection. Any breakages that occur during return shipment will be documented with photos and sent to the customer. In the event of breakage, the plate will be credited minus 50% of the purchase price. In the case of other defects, such as grease stains (finger grease), the board must be cleaned, for which 30% of the purchase price (per board) will be charged.

The customer must ensure that the goods are returned to us in a carton that is safe for transportation. Remaining stock, special formats and coated goods are excluded from exchange!

Inspection of the ordered goods by the customer: The customer must inspect the goods upon receipt of the parcel and check whether the shipping service provider has delivered the goods to the customer in perfect condition.
If damage is evident, the customer must not accept the goods and return them to the shipping service provider.

For all orders, care must be taken to ensure that the goods are allowed to acclimatize before unpacking (unrolling) to avoid breakages. We recommend shipping during the winter months (October - Easter), as well as to colder climate zones and countries, for large formats only flat on pallets to avoid damage during transportation and unrolling of the material. Shipping rolled with UPS is still possible at your own risk.

We would like to point out that you will receive all our invoices electronically as PDF files by e-mail and that you must keep these in unaltered form in accordance with the legal requirements applicable to you. They will not be sent separately in paper form.

If your goods have arrived damaged and this damage is already visible from the outside, please ask the driver to confirm this. If the parcel shows external damage and you are not sure whether something is damaged, please also ask the driver to confirm this.

Then check the goods carefully for possible defects or damage and contact our internal sales department immediately: sales@slate-lite.com (for US: usa@slate-lite.com)
It is best to attach photos of the damage (material and packaging).

You also have the option of refusing to accept parcels / pallets if damage is already visible. If you would still like to receive the goods, please contact us directly so that we can get new goods on their way to you.

Sample shipments within the EU/Mainland (or USA/Mainland) are free of charge.

All other freight costs depend on the weight and quantity of the material.
You will see the shipping costs to your destination country calculated in the shopping cart before completing the order. This applies to pallet and parcel shipping.

If you would like a quote from us in advance, please send us a request via the online store and you will receive the corresponding quote by e-mail as soon as possible. Alternatively, you can also send us your request to sales@slate-lite.com. (for US: usa@slate-lite.com)

We always recommend shipping the goods on pallets if you have ordered a very large quantity, as transportation on pallets is safer for larger quantities.

In addition, we generally recommend shipping large formats flat on pallets during the cold winter months (October - Easter), as there is an increased risk of breakage due to the cold temperatures if the material is shipped rolled.

The following material can only be shipped flat on a pallet:
1. material sealed or impregnated by us in advance
2. ArtDecors Lite in large format (240 x 120 cm / 94.48 x 47.24 in)

The price of pallet shipping is based on a daily price basis. We have no fixed conditions here.
Please send daily inquiries directly to sales@slate-lite.com

If the goods have not yet been shipped, we can subsequently change the delivery address and ship to the correct address.
Please note, however, that additional costs may be incurred if the delivery address is very far away (e.g. in another country) from the old delivery address.

If the goods have already been dispatched, it is unfortunately not possible to change the delivery address at a later date. You then have the option of refusing acceptance so that we can pass on the correct delivery address to the shipping company or courier service.

Alternatively, you can also accept the goods at the address and forward them to the correct delivery address yourself.

In all cases, please contact our internal sales department so that we can help you quickly: sales@slate-lite.com  (for US: usa@slate-lite.com)

If you notice when reviewing your order that you have received the wrong size, please contact our internal sales department: sales@slate-lite.com  (for US: usa@slate-lite.com)

You can make our work easier if you attach one or two photos.

If, when reviewing your order, you notice that you have received the wrong material or decor, please contact our internal sales department: sales@slate-lite.com  (for US: usa@slate-lite.com)

You can make our work easier if you attach one or two photos.

Our services

Would you like special shapes or sizes from our real stone decor? We can offer you our laser cutting service for this. Simply contact our sales department directly at usa@slate-lite.com

You are welcome to visit us live on site in Orlando, FL 32805.

Qualified staff will be on hand to answer any questions you may have about Slate-Lite.

Book your consultation team with us directly here in the online store!

You can also find certified Slate-Lite partners in your area via the "Dealers/Processors" page!

Slate-Lite is a genuine stone veneer and impresses with its natural look and individuality.

Book our PHOTOMATCHING service in addition to your purchase of Slate-Lite and you will receive a photo of a currently available batch by e-mail before the goods are dispatched.
This allows you to see the structure and color of your Slate-Lite in advance.

So that our team can select your batch as accurately as possible, you can leave us any further wishes and requirements for your decor in the comments field when completing your order.

Please note:
The shipping period only starts after your image selection has been confirmed.
We do not offer photomatching for the formats "Stacking Stones" and "30x60cm".

Register as a commercial customer and benefit directly from all the advantages!

Register your company in our store right now:
After successful activation by our sales department, you will be shown all conditions and prices directly.

You can find a complete list of all local trade partners directly here in the store in the Support - Dealers / Craftsmen category.

You can also order conveniently in our online store. We ship worldwide!

You can also order Slate-Lite directly from our store in your individual desired dimensions - this eliminates the need for cutting on site and you can start processing straight away.

Please note that the delivery time will be longer, as your decors will then be produced and shipped expressly according to your specifications.

Learn directly from us how to process Slate-Lite perfectly!

In our "How to Slate-Lite" workshop, you will receive a detailed product overview, information on the material properties and comprehensive processing training in theory and practice.

Dates usually take place once a quarter, training location is in Orlando, FL 32805 .

You can find the next training date and registration for the workshop here: Workshop registration

Data sheets

Slate-Lite ► The all-rounder for all applications

You can find all the information and specifications for Slate-Lite in our data sheet and detailed processing instructions, which are available to download here:

UltraThin eco+ ► The flexibility miracle

All information and specifications of UltraThin eco+ can be found in our data sheet and the detailed processing instructions, which are available for download here:

Translucent ► The translucent stone veneer

All information and specifications of Translucent can be found in our data sheet and the detailed processing instructions, which are available for download here:

Contact us!
Shopware-Agency Shopware-Agency