Stone fireplace cladding: Better than a stone look!
Create modern and elegant fireplaces, stoves and fire pits with the thin stone veneers from Slate-Lite.
Slate-Lite is easily suited for use with masonry fireplaces or as a backerboard for Swedish stoves, freestanding fireplaces and other fireplaces:
Working in high load areas with high temperatures and heat near fires are no problem for Slate-Lite's real stone decors!!
Available, Ready for dispatch in 1-7 business days
Available, Ready for dispatch in 1-7 business days
Available, Ready for dispatch in 1-7 business days
Available, Ready for dispatch in 1-7 business days
Heat resistance up to 120°C / 248°F
Slate-Lite stone veneers are heat resistant up to 120°C / 248°F and therefore robust enough for use in fireplaces.
Fire class up to Cs3d0
Slate-Lite has the fire EU class Cfl-s1 (according to EN 13501-01 for floor coverings) or B1 (according to DIN 4102) as standard. On request, Slate-Lite is also available in a special composition with fire class Cs3d0, please contact us for this.
Robust & easy to maintain
Our natural stone decors are more robust than conventional, thick raw stone slabs and easy to clean: As a rule, cleaning with clear water is sufficient to maintain the optical brilliance of Slate-Lite.
-
Burning Forest (Stacking Stone)
-
Decor: Nero
-
Decor: Burning Forest
-
Bookmatching: Arctic White
-
Decor: Blanco
-
Decor: Rustique
Forget about artificial stone look:
Real stone is trumph!
Imagine gathering around a crackling fireplace with stories being told and memories being created in the dance of flames.
Slate-Lite's thin stone veneers make that experience even more intense. Easy to use, our stone veneers bring the incomparable style of natural stone surfaces right into your home. Not only are they eye-catching, but they're also durable enough to withstand high temperatures.
Be enchanted by the elegance and durability of Slate-Lite and transform your fireplace into a style statement that combines warmth and aesthetics.
Slate-Lite is heat-resistant up to 120°C (240°F) and has achieved EU class Cfl-s1 (according to EN 13501-01 for floor coverings) or B1 (according to DIN 4102).
Slate-Lite is also available in a special composition as EU class Cs3d0.
If you have any further questions, please contact our sales department.
Our standard adhesives for Slate-Lite are temperature resistant up to 90°C (194°F), which is sufficient for most applications around the fireplace.
For special applications with higher temperature requirements, please contact our sales department.
Cutting our thin stone veneers to size is extremely easy, and almost any standard DIY tool is suitable for this: You can cut Slate-Lite to the required size with millimeter precision using a hand or table saw, jigsaw or multitool.
Simply cut the stone sheet from the back using a wooden or plastic saw blade with medium teeth. If necessary, then lightly sand the cut edge with sandpaper.
The answer is clear: Yes!
Our bestselling decors are also available directly as stone veneers with a stacking stone look. Here, thin stone veneer strips are glued to a fiberglass mesh from over 70 individual parts, so that you can create the look of a brick wall behind your fireplace in no time at all.
Depending on the installation location, you can use Slate-Lite without additional surface protection, for example in indoor are
as with low levels of stress.
For applications in areas with high loads, such as the kitchen or in the shower and bathroom, we recommend using an additional impregnation or sealant.
This is usually applied to the stone surface with a foam roller in a criss-cross pattern; this can be done before or after installation.
For detailed instructions on the protective products, please refer to the respective data sheets and recommendations in our theme worlds. In the following video we show you an example of the simple application of our strongest sealer Slate-Lite Extreme Protection.
Slate-Lite can be cleaned with all commercially available, non-corrosive household cleaners.
In most cases, clear water and a lint-free cloth or brush will suffice.
In outdoor areas, cleaning with a high-pressure cleaner is also possible, but please observe the distance recommended by the appliance manufacturer when using it.
