Special offer: 15% discount on self-adhesive Stick&Go!- Code: STICK15DEAL

Free sample shipping (USA)
100% natural stone surface
Over 70 decors available
The original since 2002

Rainforest Green Bright UltraThin eco+

$80.04*

Available in 65 workdays

Size
Accessories

$224.56*
Content

$28.76*
Content

$9.62*
Content

Piece
Product number: 2005036

The bright beauty of the rainforest

RAINFOREST GREEN BRIGHT is a decor with a light green base color and strong structures in brown and rust tones.
The fine-veined, varied lines and patterns directly evoke dense jungle and rainforest, which is only enhanced by the light green color mood. A brightening and exciting companion for all who love it rougher and wilder!

The marble decors captivate with their slit-rough surface with different and constantly changing patterns and structures.
Strong grains and elevations in the surface are typical features.
Important information: The marbles are rough as cleavage and show partial structures with greater overall thickness, as well as a stronger overall tension in the sheet!


Real stone: our quality feature

Slate-Lite is manufactured from layered stone. Color differences in the individual slabs as well as quartz veins running through the stone, natural cracks or slight chipping may occur.This is not a defect, but rather a characteristic of the genuine natural stone surface and makes each Slate-Lite stone sheet absolutely unique!


Foto Matching Service

Please note that the material images shown here are only examples of this decor. Each Slate-Lite stone sheet is unique and may vary from the images shown here.
With our optional Fotomatching-Service , you will receive photos of the current available batches of the material after you place your order and can choose your personal favorite before delivery!
This way, despite the 100% natural stone surface with its changing colors and textures per sheet, you have full control over the look of your delivered stone veneers.
(Currently this service is not available for the formats 30x60 cm and our stacking stones).


UltraThin eco+: The flexibility wonder

Our product line ULTRATHIN ECO+ is especially perfect for furniture construction, difficult edge areas in interior design, complex shapes and the creative sector:
Due to the cotton mat on the back, UltraThin eco+ can be formed three-dimensionally to some extent and has a total thickness of less than 1mm!
UltraThin eco+ thus opens up completely new possibilities for interior design pieces, small-scale fine work or complicated curves.

The processing possibilities are also unique: You can even cut our stone flexibility wonder to size with scissors or a cutter knife!

    Key facts for UltraThin eco+
  • 100% natural stone surface
  • Total surface area < 1 mm
  • Bendable radius: Three-dimensionally formable
  • Can be cut with scissors & cutter knife
  • Weight approx. 0.8 kg / m²
More detailed information on UltraThin eco+can be found in the ► Datasheet


Convenient standard size: 122 x 61 cm

Whether parallel, loose or straight bond: With our easy-to-use standard size 122 x 61 cm you can lay your personal desired pattern and create lively living environments in no time at all, just as you wish.
One sheet in the format 122 x 61 cm requires approx. 1 pack 600 ml of adhesive.


Quick & easy processingt

With our stone veneers you renovate quickly & easily, without any special tools!
Simply cut to size as required, apply adhesive, press on stone leaves and you're done!
(Please note that depending on the place of application, you should impregnate or seal the stone surface with a suitable protective product from our range. This applies to places with high load such as in wet areas, the kitchen, as flooring or partly in outdoor areas).


Still questions about the product? Get in touch with us!

We will be happy to advise you personally on your individual project: Simply pick up the phone, send us an E-Mail,, chat via WhatsApp or arrange a video chat appointment in our Online-Showroom!

Properties "Rainforest Green Bright UltraThin eco+"
Decor: Rainforest Green Bright
Stone type: Marble

Fotomatching

Fotomatching
Photo matching of your order goodsSlate-Lite is a real stone veneer and impresses with its natural look and individuality. Add this optional extra to your Slate-Lite purchase and you will receive a photo of a currently available batch via email before the goods are shipped. This allows you to see in advance how your Slate-Lite is designed in detail and color. In order for our team to select your batch as accurately as possible, you can leave us any additional wishes and requirements for your decor in the comments field when completing your order.Fotomatching VideoPlease note:  The shipping period starts only after the confirmation of your image selection. For the formats "Stackingstones" and "30x60cm" we do not offer photomatching.
$8.11*

Available, Ready for dispatch in 1-7 business days

Adhesive

Pressure roller 7 inch
$14.49*

Available, Ready for dispatch in 1-7 business days

Protection & Care

Slate-Lite Extreme Protection
Slate-Lite Extreme Protection is a two-component protective sealer with previous primer for the highest loads in various applications. The sealer is suitable for walls and floors indoors as well as for wet areas and reliably protects the stone surface of Slate-Lite against soiling. The surface to be processed must be clean, dry and free of dust and grease. First apply the primer with a Short pile roller in a crisscross pattern. Be careful not to apply too much pressure to avoid the formation of bubbles. Allow the primer to dry for at least 3 hours. Mix the two components in the specified ratio of 5:1. Apply the mixed product evenly with a Short pile roller. Again, apply only light pressure, otherwise white bubbles may appear. Allow to dry for a sufficiently long time. Clean equipment with water immediately after use.Multiple applications increase the protective effect.Easy cleaningSmooth surfaceNo to slight color deepeningConsumption: approx. 0,026-0,030 lbs/sq.ft per coatSuitable for: Walls, shower & bathResistance: Highminimum 1 coat: surfaces with low load, wet areas in shower & bathMin. 2-fold application: surfaces with high load such as tile backsplash in kitchensSuitable for wet areas, but not for standing waterDownload: Datasheet
Content
Variants from $124.12*
$224.56*

Available, Ready for dispatch in 1-7 business days

Special Protection
Slate-Lite Special Protection is a ready-to-use, weather-resistant and yellowing-free impregnation based on organic active ingredients.The capillary forces of the stone absorb the pearl protection without closing the pores. This results in a high degree of effectiveness. Fast protective effectFood-safeLow color enhancing of the materialUV-resistantNon-sticky curingSuitable for: Walls, Shower & BathResilience: MediumColor change: MediumCoverage: approx. 194sq.ft. per 33.8fl.oz. at 1x applicationDownload: DatasheetDownload: Safety Data Sheet
Content
$28.76*

Available, Ready for dispatch in 1-7 business days

Special Cleaner
Slate-Lite Special Cleaner is ideal for removing adhesive and old silicone seals from Slate-Lite.Simply apply the cleaner to the poluted area on a lint-free cloth and remove the dirt.Download: Safety Data Sheet
Content
$9.62*

Available in 14 workdays

Special Impregnator 33.8 fl.oz.
Slate-Lite Special Impregnator is an effective protection against oil, grease and water stains. The impregnation does not contain solvents, it is water-based. No solventsWater and oil repellentImproved care characteristicsEasy application with a rollerRenew every 4-5 yearsContent: 33.8 fl.oz.Yield: approx. 323 sq.ft. per Bottle (with 2 time application)Suitable for: WallsResilience: LowColor change: LowDownload: Safety Data Sheet
$24.58*

Available, Ready for dispatch in 1-7 business days

Akemi stain remover
Akemi Oil and Grease Remover PasteUse this Akemi cleaner to remove tough stains and impurities from Slate-Lite decors.Download: Safety Sheet
$23.88*

Available in 14 workdays

Tools

Terminal Edge black F-Line 250cm
Ensure a high-quality and elegant finish of your Slate-Lite project with our profile strips!Available variants:Terminal EdgeJoint ProfileExternal cornerInner corner
Color
Profiltyp
$40.59*
Cold wax set of 20
Cold wax pinsWith our Slate-Lite cold wax the edge processing of Slate-Lite is easier than ever:If you want to do without corner profile strips and realize a corner/edge of two stone veneers butt to butt, you can quickly and easily connect the connecting edge and close gaps with our cold wax pins. In the cold wax set are 20 cold wax pencils included, so you can choose the best matching color for your decor easily on site with you.Just drive with the cold wax pencil with light pressure along the butt edge of the two stone panels. Through the pressure and the frictional heat, smaller gaps are closed.The closed edge then carefully grind if necessary.
$35.95*

Available, Ready for dispatch in 1-7 business days

Cartrige/ Silicone gun suitable for 20.3 fl.oz. tubes
Cartridge gun suitable for glue in a 600 ml tubular bag.Suitable adhesive products: Slate-Lite Floor & Wall Interior / Slate-Lite Exreme Bath & Exterior / Soudal 240 FC
$17.98*

Available in 10 workdays

Pressure roller 7 inch
$14.49*

Available, Ready for dispatch in 1-7 business days

B3 trowel *
B3- Trowel for the optimal processing of Slate-Lite. Apply the adhesive when processing Slate-Lite with this B3 Trowel to create optimal groove formation and adhesive strength.
$6.02*

Available, Ready for dispatch in 1-7 business days

Contact us!