MOLTO ROSA is a decor with a gray base color and structures in pink and red tones.
The structures and colors alternate between subtle gray and gentle reddish patterns – the perfect mix for understated room design, where you often only discover the exciting beauty of the color patterns in the stone at second glance.
therefore spreads calm and balance in every room without being boring – the perfect choice for modern room design, stylish commercial spaces or high-quality office areas.
As a Translucent-variant, the pink and red tones unfold particularly soft, elegant light effects when backlit – ideal for real design statements.
Project examples and further material photos for MOLTO ROSA can be found here: Image database MOLTO ROSA
Our TRANSLUCENT product line is the translucent stone veneer for impressive backlighting with real natural stone. Combined with a suitable light source, it creates fascinating lighting effects that enhance spaces and make a true design statement – whether in living areas, bathrooms or high-end commercial interiors.
Key facts for TRANSLUCENT
► 100% natural stone surface
► Translucent for spectacular backlighting and lighting effects
► Overall thickness approx. 1.0–2.5 mm
► Flexible and bendable (ideal for curved surfaces)
► Optimised for decorative interior applications with LED backlighting
Slate-Lite is made from layered stone. Colour variations between individual sheets, quartz veins running through the stone, natural cracks or slight chipping may occur. This is not a defect, but rather a characteristic of the real natural stone surface and what makes every Slate-Lite stone sheet truly unique.
Our regular Slates generally have a slightly softer stone surface and stand out for their richness of colour, as well as constantly changing patterns and textures.
Mica slates usually have a somewhat rougher surface with more uniform patterns. A special visual highlight is the shimmering effect created by the natural quartzite content within the stone.
Limestones impress with a smoother surface and relatively uniform patterns and textures.
Sandstones are characterised by a slightly rough, somewhat grainy surface, including slight differences in height and, in some cases, smaller raised areas with a greater overall thickness.
Marbles have a naturally split surface with pronounced veining and raised textures. Continuously changing patterns and partial structures with a greater overall thickness create a striking overall appearance.
Molto Rosa is a .
In principle, any light source can be used for backlighting Translucent – the key factor is even illumination for a clean lighting effect.
The easiest solution is a high-performance LED panel. Alternatively, fluorescent tubes, light bulbs or LED strips can also be used; in these cases, a diffuser or frosted glass panel placed between the light source and Translucent helps to improve light distribution.
A sufficient distance from the light source (approx. 6 cm) also ensures optimal light diffusion. Depending on whether warm white, cool white or RGB LEDs are used, different lighting moods can be created – from cosy to modern or colourful.
The basic installation process for Translucent involves four simple steps:
- Lay Translucent completely flat and decide on the order and arrangement in advance, as the lighting effect may vary
- Optionally apply an impregnation or sealer depending on the area of use (in wet areas, ideally after cutting and bonding)
- Prepare the substrate and the back of the sheet so they are free from dust and grease, then apply a suitable adhesive, such as Translucent Crystal Clear, evenly and without air bubbles using a smooth trowel
- Position the stone sheet and press it down firmly; if required, bond it to glass or acrylic as a backing and plan the backlighting accordingly
For detailed installation instructions, please download the guide and data sheet below.