Highest Protection in Extreme Areas

Slate-Lite Extreme Protection is a two-component protective sealant with prior priming for maximum loads in various application areas.
The sealant is suitable for walls and floors indoors as well as for wet areas, and reliably protects the stone surface of Slate-Lite from dirt.

The area to be treated must be clean, dry, and free of dust and grease.
First, apply the primer with a short-pile roller in a crisscross pattern. Be careful not to apply too much pressure to avoid blistering.
Let the primer dry for at least 3 hours.
Now mix the two components in the specified ratio of 2.5:1. Apply the finished product evenly with a short-pile roller. Again, apply only light pressure to avoid white blistering. Allow sufficient drying time. Clean tools with water immediately after use.
Multiple applications increase the protective effect.

• Easy cleaning
• Smooth surface
• No to low color deepening
• Consumption: approx. 0.027 - 0.031 lb/ft² per coat
• Suitable for: walls, showers & bathrooms
• Load-bearing capacity: High
• At least 1 coat: areas with low loads, wet areas in showers & bathrooms
• At least 2 coats: areas with high loads such as kitchen backsplashes
• Suitable for wet areas, but not for standing water

Note: At higher temperatures, the material cures significantly faster than specified in the instructions and data sheet.

For detailed information on application and composition, please download the corresponding data sheet: