How is Slate-Lite bonded?

Our real stone decors are very easy and uncomplicated to install. For this purpose, the appropriate adhesive is spread on the surface to be processed or on the back of the stone sheet and the Slate-Lite sheet is then pressed on at the desired location.

We have different adhesives in our range depending on where they are to be applied. Please refer to the respective data sheets of the adhesives for further information on processing and application.

In general, Slate-Lite is best applied with polymer adhesives.

The adhesive products in our range are:
Slate-Lite Extreme: Bath & Exterior: All interior & exterior bonding of Slate-Lite.
Translucent Crystal Clear: Transparent adhesive for Translucent
UltraThin eco+ Contact Adhesive: Suitable for all UltraThin eco+ bonding applications
Spray contact adhesive for grouting.

We generally cannot recommend other tile adhesives for the time being, as permanent bonding cannot be guaranteed here.
More detailed instructions for processing Slate-Lite can be found in our shop in the "Processing" section and in the respective data sheets.

Processing instructions for Slate-Lite as PDF: [DOWNLOAD]
Processing instructions for UltraThin eco+ as PDF: [DOWNLOAD]
Processing instructions for Translucent as PDF: [DOWNLOAD]